To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.
The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
I would love to see Garner, NC.
Is garner included in the Raleigh pack?
Thanks for your work
Added to the todo-list 🙂 nope Garner is not included and the Raleigh pack. Thanks for your suggestion !
Once again thanks for the fantastic job you did with Örebro City. Still enjoy it every week. Would it be possible to do Pattaya (Thailand) as well? Not sure if it’s available in 3D photogrammetry, if not maybe Bangkok are?
Thanks for your feedback! I checked for Pattaya and Bangkok but sadly none of both are available in 3D photogrammetry 🙁
I’d really love to see the greater Jackson, MS, area including Hinds, Rankin, and Madison Counties. There are a few airports there too including Medgar Wiley Evers International (KJAN), Bruce Campbell Field (KDXE), Hawkins Field (KHKS), and John Bell Williams Airport (KJVW).
I am not the champion for airports 😀 but let’s see what I can do (or not) 😀
sorry for my late feedback ! I was busy over the week-end. Let me add your suggestion and shall “decompose” the coverage 🙂 thanks a lot for your ideas !
my ideas are the cities of hengelo overijsel ,enschede and den helder
Excellent ! added to the todo 🙂 pls note that Den Helder is not available in 3D photogrammetry, but the 2 others are 🙂 Thanks a lot for your suggestion !
hey daniel
my ideas for this month
– Aspen, CO
– Bozeman, MT
-Keystone, SD
-Orem, UT
-Casper, WY
-Duke University, NC
-Gorman, NC
-Statesville, NC (where my dog is from haha)
-Hickory, NC
-Morganton, NC
Oh just one question, wasn’t Duke University already included in the Durham scenery ?
Nope Duke University is to the West of where you did the original Durham mod. You did the downtown area. Cameron Indoor Stadium is a good place to focus.
If you could also add the East Chapel Hill Highschool – Chapel Hill area to your list.
My goal is to eventually cover that entire area like you did for Belfast 🙂
ok great ! let me add this into the list. Your dog will be happy. the scenery is nearly finished 😀
haha thank you!
Excellent ! Thanks a lot ! let’s start by the one to please your dog 😀
Just dowlloaded my birthtown The Hague. and explored it right away. Wondeful! Thanks a lot.
my pleasure ! and thanks a lot for tyou feedback !
Denhaag and Scheveningen are perfect and I just saw that you added Wateringen, very nice. I would love to see Delft, I think it will be a nice addition to The Hague. It is also a big city with famous places, for example TU Delft. Delft is quite large so maby a good idea to make a north and south to connect it to Wateringen and the rest.
I went there this summer ! it was just amazing and so beautiful ! I will see how to cover the city optimally. Thanks 🙂
Athens, Georgia
cool ! thanks for the suggestion. Added to the list 🙂
Does anybody have a solution for the dark flashing/glitching patches that occurs on all third -party photogrammety cities, with DX12? A solution other than switching to DX11 😉
I asked in the official Flightsimulator forum, but didn’t get any answers. I ask here becuse I belive that everybody here regulary flies over third-party photogrammety cities, using DX12 and must also get these glitches.
Maybe “Enjoy it Fly” has a theory of what is causing this?
oh ! very interesting ! I experienced exactly the same issue, and reverted to DX11. I did not investigate further as I was under the impression that DX12 is still in Beta (isn’t it ?)
Actually before reverting to DX12, I was wondering if this this was also due to DLSS. Have you activated those features too in combination with DX12 ?
I will try to investigate on my side when I have some time and find if there is a setup that works with DX12 & third party photogrammetry !
I haven’t activated DLSS in combination with DX 12. Just ordinary “TAA” and the only thing thats differ is Dx11/DX12. After some more testing i understand that the dark flashing occurs when the photogrammety is morphing. Increasing “Terrain level of detail” doesn’t help.
I know Dx12 still is in beta, but I get much better performance now with DX12, than with DX11.
Hope it’s getting sorted out.
Thank you for all you do! My suggestion is for a new version of Edinburgh, Scotland. Google recently upgraded the Photogrammetry for the whole city. I know Thalixte already released his version a while ago but it uses the old data from over 10 years ago, the new data has lots of road and building changes that have been completed over the years. His version also doesn’t include the photogrammetry around the airport or towards/around the 3 famous bridges. It would be great to see this next to the amazing Pyreegue’s EGPH airport scenery.
FYI, I asked him the question. Hopefully I will come back with some news quickly 🙂 cheers
Hello, thanks a lot for your very positive feedback. By respect to his great work, I propose that I contact Thalixte for this and will keep you posted. He is always really cooperative and making a wonderful work. He also created a new plug-in that normally retrieves the last version of the photogrammetry data.
I will keep you informed of his feedback.
Thank you, I look forward to hearing if it can be updated. Not sure if you can just download the new data and use the original tile placements to save a lot of work or if it would have to be done from scratch again with the new areas to the west/northwest added.
Actually the entire scenery has to be rebuilt. As the download is “fresh”. FYI no feedback yet from Thalixte (I just checked).
Hilo, Hawaii
This location includes a nice view of Rainbow Falls in Google Earth. 19°43’10″N
155° 6’34.50″W
I have just checked, it seems wonderful ! let me see what can be done. it is added to the todo list 🙂
Many thanks for the splendid Hilo scenery including the Rainbow Falls. It is an area of which I have fond memories. I sent a tip with Paypal, peace, Mike Hefferan – UkeDog
Hey there! Thanks for all your hard work and dedication to MSFS!! I would happily pay to have the Greater Houston/Galveston, Texas region done! 🙂
Thanks a lot or your suggestion and message ! Sure, just let me know more precisely what you would like to see, knowing that in average, we can cover in 1 go a square of 1mile x 1mile.
Cheers
Little Rock AFB, AR
yeah ! let’s go. FYI i will not do the airport (as I am not good at it) but will try just beside it. Cheers and thanks for the suggestion !
All I am asking for is to get the buildings right. Was stationed there in the 90’s and looks nothing like it did back then. Would be nice to see it’s current look.
ok 🙂 great ! shall take your comment into consideration.
I wanted to be more specific in it’s location. It is actually located in Jacksonville, AR and the ICAO is KLRF. There are other military installations in the area, so I wanted to be really specific with the city it is located in.
Hello my Friend……
I sent you $25 US on PayPal
rlbailes62
I’d like to get these Cities
Gulf Breeze, FL
Daytona Beach, Fl
Ft Lauderdale, FL
Key West, FL
Thanks in advance,
MrPlaneCrazzy
Thank you very much! I have added your requests to the todo, will do my best to have them published quickly, on top of the existing plan 🙂 Thanks again for your continuous support !
Hey I see you uploaded Navarre, FL and Biloxi, MS but am not seeing Titusville, Fl?
Thanks for your work.
Ohhh sorry ! I forgot to publish it. Doing it now ! Sorry for this !
Thanks
Would you be open to doing the Northern Virginia area? Willing to pay as sponsor for it.
thanks for your comment. Sure. Please feel free to suggest areas (I will have to validate that they are available in 3d photogrammetry though – btw you can check yourself by opening google map, displaying in 3D the area you are interested in and by tilting it – if the buildings appear in 3D, bingo, it should work). Cheers.
Eskilstuna, Sweden
(After your terrific work on Vasteras, I hope you can consider doing Eskilstuna. One of the few cities left undone with photogrammetry in Sweden).
OHHH is it ? let’s goooo then ! urgently before google removes the 3d 😀 (never happened though) 😀 thanks for your nice comment also !
Hello! How much can you send to get priority. And if you already made a submission could that be moved to priority when supporting you? Thanks love your work.
thanks a lot for your comment. People have been giving between 10 and 20 USD/EUR. But all contribution is sincerly appreciated and sure I can happily put in priority a scenery you already suggested – just let me know which one (this week is already “full” for me) as I am working on the current priorities, but for next week, for sure !
Had another request so just PayPal’d for another coffee and pastry! Could you please do Hattiesburg, Mississippi, USA? My college is sadly represented by terrible generic buildings.
Monroe, WA and Wilsonville, OR look great! Thanks again!
Whoops, forgot to add my name above!
Thanks a lot for the coffee and pastry 🙂 I will eat and drink them while still hot 😀 Sure I have added Hattiesburg in the todo ! Thanks again for your continous support !
Thanks for doing Hattiesburg so quickly! Alas, you got the downtown area, but the university is still autogen. Not sure how big an area is viable to do for an upload — maybe it’s time to learn these tools myself, as you’ve got a ton of scenery to do and I don’t want to hog your time. 🙂 But I was hoping to get an area more along these lines, to encompass the University and other key areas of the town: https://imgur.com/a/LUCJl5m
NO worries if that’s too much for either (1) upload size, or (2) your time availability! I can look into learning how to process myself if so.
Cheers, and thanks again!
Check the publication I just did for you : https://flightsim.to/file/43142/hattiesburg-university-ms-usa hope you will like it 🙂 It is true the area is just soooo big, only up to 1 mile x 1 mile max can be done (to avoid Google Maps ban).
And it is a pleasure to prepare sceneries that I know will bring something special to one or several simmers 🙂 Also thanks a lot for your support !
Oh, wow, thanks for doing the campus! Awesome. And that’s great info on the radius limitation. Much appreciated!
Asking kindly for:
– Centennial, CO
– Plymouth, MA
Thanks!
Thanks a lot for your suggestions ! I have added Centennial. Plymouth, sadly is not available in 3D photogrammetry and thus cannot be done.
Patuxent River Naval Air Station, Maryland, USA
Thank you for your consideration
thanks for your contact. I checked but sadly that place is not available in 3d photogrammetry. So it is not possible to proceed. Sorry for this.
Lets get Costa Rican Crazy with Liberia, Costa RIca!
hay que pena ! that city is not available in 3d photogrammetry, thus nothing can be done 🙁 sorry for this
Downtown Phoenix, Arizona including if possible Phoenix Sky Harbor International Airport….please, please, PLEASE. Many thanks!
thanks a lot for the suggestion. added to the list. not sure about the airport as I am not an expert on this. but shall see 🙂
I would love to collaborate with you on Sacramento, CA if you are open to adding it to your roadmap – I am the author of the KSMF Sacramento International Airport addon on FlightSim.To (https://flightsim.to/file/11178/ksmf-sacramento-international-beta) …, please let me know, as I love your work and would really like to see my hometown scenery improved in MSFS
Thanks!
sure ! with pleasure. I would be happy to collaborate and work together on Sacramento CA. Let me add it to the roadmap.
Do you have any other ideas of collaboration ? I am really keen to work with someone 🙂 Cheers
Hey EnjoyIt……..Just sent you a $20 spot on Pay Pal RLBAILES62
Could you try these cities please?
Titusville, FL Mobile, AL Navarre, FL Biloxi, MS
Thanks in Advance
MrPlaneCrazzy
Thank you very much for your continous support 🙂 I checked your suggetions and they are all available in 3D photogrammetry. So they are in the todo-list. I will also handle them in priority 🙂 Thank you again !
Please consider St. George Utah. It’s just to the south of Zion National Park and is a beautiful place!
Hello Captain ! added to the list ! thanks for the suggestion 🙂
Suggestion: Outer Banks, NC (Ocracoke, NC through Corolla, NC) plus Emerald Isle, NC. Great Work!
ooops, I checked, but none of your suggestions are available in 3d photogrammetry 🙁 thus they cannot be done. Sorry for this!
hello i suggest if possible the rest of the the sanjuan pierto rico area to be work on that would be great. and maybe ponce Puerto rico please
Vamos !!! in the todo list 🙂 Gracias !
Kalmar & Linköping, Sweden
thanks for the 2 suggestions 🙂 sadly Kalmar is not available in 3D, while Liköping is (thus added to the list!)
Hi Daniel,
Hope all is well my friend. Thank you for your amazing work.
Some more requests:
+Kure Beach, NC
+Carolina Beach, NC
+Figure Eight Island, NC
+North Myrtle Beach, SC
+Bird Island, Nc
+Ocean Isle Beach, NC
+Shallotte, NC
+Oak Island, Nc
great Zack ! all of them added (and also the spring lake below:-) thanks a lot !
thank you!
also if you could do Spring Lake, NC
Portland, Maine
cool ! added to the todo ! thanks for sharing your suggestion 🙂
Cleveland, Ohio.
Great !! added 🙂 thanks for the idea
WOOT WOOT
I’d like to see the Auburn University Campus in Alabama to be done to complement the University of Alabama already in your ToDo List
Yep, added too 🙂 thanks for the suggestion
Need Caribbean cities/towns! Habana (Cuba), Kingston (Jamaica), Santo Domingo ( DOminican Republic), Port-u-Prince (Haiti), and so forth…thanks in advance!!
Hello, thanks a lot for all your suggestions. I checked in details each of them, but none are available in 3d photogrammetry in google maps 🙁 so nothing can be done. I am sorry for this 🙁
I would love it if you could make Almere west and east (the Netherlands). It is a big city near Amsterdam and a nice place to fly over.
OK cool ! Added to the todo list 🙂
Lovely 😊 thank you so much
It might be a option to make 2 versions, because Almere is divided into 2 pieces. You have Almere Stad and in the east Almere Buiten. Google earth shows the two areas nicely
Would love to see more NYC Metro area such as Westchester or even Stamford, CT!
cool ! thanks for the suggestions ! added into the todo list. BTW, funny your pseudo 😀
Wow, this is a great initiative. I’d like to request Cork City Ireland. Vizipok has done a good Cork City but unfortunately it has no night lighting and it doesn’t appear there are plans to add it. So no late evening arrivals 🙁
Great with pleasure ! let me check this in details. And especially for the night lighting 🙂 I have it added to my todo. Thanks again !
Thank you so much for putting this ‘On the Tarmac’ so soon and for noting the night lights. I always fly real time and now the evenings are rapidly getting shorter and it’s usual dark on weekdays when I fly.
my pleasure 🙂
btw that was me posting here a few seconds ago, forgot to put my tag
So happy to see this go live, the you-tube looks great, thank you for doing this. Looking forward to a night time arrival.
Hello, hope you’re doing well love your work!
Could you do Roseland Chicago IL, Chicago Area or Douglasville, GA. Thank you so much
Thanks a lot for your very kind message ! I am super happy to get feedback and comment about the sceneries and especially if you like them 🙂
Sure about Roseland Chicago(IL) and Douglasville(GA). I checked and they are available in 3D. I have added them into my todo 🙂 I will update the progress directly here 🙂
You are so appreciated thank you! Enjoy the rest of your day.
Just like to say Thank You for completing my request
Puerto Rico – Mega Pack
Pensacola, Fl
They turned out great!!
No worries about Navarre Beach, Fl.
Maybe you could try Pensacola Beach, Fl.
Thanks for your work.
I will be donating and requesting again next week.
Thanks a lot for your feedback on the sceneries 🙂 It was also a pleasure to do them, kind of “virtual travel” 😀 San Juan is soooo big ! It was impossible to cover more without risking a GoogleMaps ban ! But I shall try to extend a bit more around. Do you have any preferences ?
Let me add Pensacola Beach FL. and it is very strange for Navarre Beach. I even tried with the new module from Thalixte, but no chance 🙁 the results were 2D only !
Thanks again for your support !!! have a great week-end !
Anything from Alaska, thanks!
😀 sure, I will then not disclose the place until it is published 😀
Hello! would you please consider TIjuana, Mexico? and perhaps Monterrey, Mexico as well? These would go great with our airports! Thank you!
Yep ! perfecto ! TIjuana and Monterrey are SOOOOOO big, I will do a sub-set, probably focusing on the city center -ish 🙂
Baton Rouge, Louisiana, USA. Please. If you have the opportunity.
Thank you for the work you’ve done.
Cool ! let’s go ! added to the todo 🙂 follow the progress here directly
I have and enjoy a number of your scenery mods. Could you do Cape Canaveral/Cocoa Beach area?
Thanks
Sure ! thanks for the suggestion ! I have it added to the todo list 🙂
Queretaro Intercontinental (MMQT),, I was working and living in that mexican city and will be great to have a realistic scenery of it. Many american airlines fly in and out of this single rwy airport. Thx for your great work
Espectacular !!! Vamos 😀 thanks for the suggestion and added to the list !
Thanks for all this effort! Great stuff! I’d love to see the southern portion of Alexandria/Arlington Va and the National Harbor/Gaylord hotel complex…which is so cool to see on the approach to KDCA
OH OH ! I checked all those places and they are not available in 3D photogrammetry. Actually only a limited coverage is available. I guess there is a good reason… I am sorry, thus, it cannot be done
I saw that you just released Pensacola and I’m excited. I would recommend that you go ahead and add the Fort Walton Beach area/Eglin AFB area.
GOOOOO ! added to the list 😀 thanks for the suggestions !
Hey, just sent a tip via PayPal as a tiny thank you for all of your hard work and your great support of the community! Love that you just take requests from folks. Speaking of requests, could you please do Monroe, WA, USA? Duvall to the south and Snohomish to the West are photogrammetry, but Monroe’s omitted. Would be great to see the downtown, speedway, bridge, reptile zoo, etc. represented! Checked Google Maps and there is photogrammetry.
https://goo.gl/maps/JRY5eqLTYtpXYfxHA
Thank you very much for the TIP 🙂 I will take care of your request in priority 🙂
What I meant above is that Duvall and Snohomish are photogrammetry in the simulation, but Monroe isn’t. 🙂 But it is in Google Maps. As a writer, you would think I would be better at this communication thing!
😀 let me add Monroe, sure ! You made me laugh about the “as a writer” comment 😀 were you stressed ? 😀
I just hate it when I write something that’s unclear! It’s my job, so I should do it decently. 🙂
Downloaded Monroe on my lunch hour and WOW, it looks great! Soooo much better than the default generic stuff! Thank you sooo much!
If I could, I would like to make a request for a minor tweak… Any way you could exclude the photogrammetry around W16 First Air field? (Just west of the Speedway.) There are a couple of huge photogrammetry trees on approach, a big blob of photogrammetry brush on final, and some stuff on the field as well. Plus a bunch of photogrammetry trees on the east side of the racetrack. (Though not sure how easy is to exclude those without losing the track?) If it’s not too much hassle to exclude the airport area, it would make the scenery perfect for flying into W16 First Air.
I captured some screen showing what I’m talking about, with the problematic areas around the airport highlighted: https://1drv.ms/u/s!AhCZCyzU8LRKrblLZZho-s6GchPnug?e=Pi1Ohj
Thanks again!
Oh woow ! I did not notice that there was an airfield there :-O I was too much focusing on the scenery alignments and everything and completely missed it ! Let me try to correct it. I will post an update rapidely 🙂 Thanks really for your feedback.
update information : I have checked your screenshots. and tried to exclude the airfield area. This actually regenerated the “default FS buildings” that seems not adequate but I will try to fix it. I also checked to remove the trees on the approach and by doing so it actually removes also the speedway 🙁 FYI I also added some night lights on the speedway.
update 2 : I have just uploaded a new version of the scenery in flightsim.to. Please have a look and let me know if this is better 🙂
Wow, that was quick! Thanks so much! The approaches look worlds better now. Honestly, the trees to the east of the speedway aren’t that bad, and it’s definitely preferable to have the speedway there! Night lights are an awesome addition.
The town looks amazing. It’s really cool to look over and see the “Evergreen Fairgrounds” writing on the buildings next to the airport.
There’s still one area on the east edge of the airport that has photogrammetry that pops through the existing hangars. On the north end, there’s a big blob that pops up next to the “carport” hangar. On the south, there’s some trees and photogrammetry buildings popping through the hangars. (I do have FreakyD’s W16 Monroe airport installed). Here’s a couple of pics: https://1drv.ms/u/s!AhCZCyzU8LRKrblVfXowVSQZKf6sOA?e=n5ecRu
The photogrammetry stuff by the airport is pretty minor stuff overall, but if you do any more revisions, it’d be cool if that could be excluded.
Cheers!
Thanks for the feedback too ! I checked your screenshots. I did not know that you are using the W16 Mod, which is creating the conflicts with the hangar I put on purpose. So I can remove them if you want. Concerning the “overlapping” trees and buildings, this is due to the fact that the tile covering the speedway is actually overlapping a bit the airfield, and what you see is really at the border. I know that there are techniques to remove manually this “excedent” photogrammetry information, but I don’t know how to do it !
I will generate a new version where I remove the hangar, and then should conbine with your existing mod. For the rest, I still have to learn a lot 😀 to reach that level of perfection (I am trying though, when I have some time). But I will not be able to do it for the moment.
Hope this is fine with you.
The new scenery (without the hangar) will be published today 🙂
Have a great day and happy flight !
This is all great, thank you for removing the hangar. Makes sense to leave the other overlap in place, and it actually fills out the edge of the airport area anyway. Looking great, and I really appreciate all the hard work you put into it!
Thanks again! Looking forward to seeing Wilsonville/Charbonneu on Friday!
I’m just bummed Juneau, AK doesn’t have photogrammetry. 🙂 Maybe someday!
yep true, Juneau is not available in Photogrammetry 🙁 and thanks a lot for your feedback !
I love your mods man. I’ve been really really enjoying them so far! Could I request Waco Texas (with Baylor University) ?
I’m in North Carolina and so many of your mods have added local sights where I fly. Really excited about your Asheville one that you are in the final stages for!
Thanks a lot for your nice comment and the suggestion ! I have added Waco to the todo list 🙂
I’ve been asking for Jackson, TN on .to for a while now. I’d like to get it officially on the list. I would very much like an all encompassing scenery including the southern strip of Jackson, as well as the ballpark area to the east, the industrial and Ag research to the west, and the community of Three Way to the north. I appreciate all your sceneries, especially those in the Southern US.
oops have you ? sorry I missed it. My fault ! let me add it to the list ! I propose that I will start from where the city is (at the bottom of the map) and then go up, this will help me getting organized.
Hey Enjoy, so how long does it typically take for an upload to appear on flightsim dot to after it is removed from this list. My request are no longer here, but have not appeared on the download site either. Thanks
oh ! check my publication calendar available here : https://spaghett.is/enjoy.it.fly/publication-calendar/ you will find “Puerto Rico”, “Pensacola”,… please note that I have an issue that I was not able to solve with Navarre beach 🙁 I shall try further, but not successful so far. Usually the sceneries are out at 5pm (CET – Europe). I tried to plan all the “sponsored” sceneries for next week, the are still in uploading to Flightsim.to 🙂 Hope this answers your question !
Thank You sir
you are welcome. Oh, in my previous comment I wrote that I planned all the “sponsored” sceneries for “next” week. I meant “this current” week 😀